To install a concrete shed base, you will need the following materials:
- Sand or gravel
- Rebar or wire mesh
- Concrete mix
- Water
- Wooden forms or pre-made plastic base forms
-
Prepare the area: Clear the area where the shed base will be installed and mark the outline of the base. If the ground is not level, you may need to excavate or fill in soil to create a level surface.
-
Create the forms: Use wooden boards or pre-made plastic forms to create the edges of the base. The forms should be tall enough to hold the desired depth of concrete.
-
Add a base layer: Spread a layer of sand or gravel over the area within the forms. This will provide a stable base for the concrete and help with drainage.
-
Mix and pour the concrete: Follow the instructions on the concrete mix to prepare the concrete. Pour the wet concrete into the forms, using a shovel or hoe to spread it evenly. Tap the forms gently with a hammer to remove any air pockets and smooth the surface with a trowel.
-
Cure the concrete: Allow the concrete to cure for at least 24 hours before removing the forms or using the shed base. Curing the concrete involves keeping it moist and at a consistent temperature to allow the concrete to fully harden. You can cover the concrete with a tarp or wet burlap to help maintain moisture.
It is important to follow the instructions on the concrete mix and use caution when working with concrete. If you are not confident in your ability to safely install a concrete shed base, it is best to hire a professional contractor.
From a shed base to a bin store to an outside building to whatever you want remove and clear an area add an MOT base and then top off with concrete perfect for a shed base.
